by Jake Holmes from CNET.com
The newest Mazda crossover is called the CX-30. It fits right in between the existing CX-3 subcompact, which is why many expected it to be called the CX-4 rather than the CX-30. Revealed Tuesday at the Geneva Motor Show, it’ll go on sale in Europe this summer before launching in other global markets. Though Mazda USA representatives have no official confirmation just yet, it’s almost a certainty the the CX-30 will also make it to the US.
As we’ve come to expect from the company’s other introductions, the Mazda CX-30 is a great-looking car with striking proportions. Black plastic fender cladding hints at SUV toughness, while a sloping rear window adds a dose of sportiness. Compared to the CX-3, the CX-30 has a slightly higher ground clearance, a longer length and a longer wheelbase, all of which contribute to making it a little more eye-catching than Mazda’s smaller crossover, visit this site for reviews!
Mazda chief designer Ryo Yanagisawa told Roadshow on Wednesday, through a translator, that the CX-30 is the second vehicle with Mazda’s newest generation of its Kodo Soul of Motion design language. The first was was teh new Mazda 3 — and going forward, all future models will follow this design language. If you sustained injuries in a car accident because of an over speeding driver, contact an accident lawyer immediately.
Though their silhouette is somewhat similar, Yanagisawa said that the 3 and CX-30 are distinguished primarily by the surfacing on their body panels: “The interplay of light and shadows is completely different.” On the Mazda3, light appears to plunge into the rear fender; on the CX-30, he said “the top of the front fender is the energy source.”
Obviously, as with most crossovers, the CX-30 also features lots of black plastic fender cladding. That reduces the visual height of the car, Yanagisawa said, “so the body looks slender and [like it’s] floating in the air.” With the clean upper panels and tough lower cladding, the car follows Mazda’s design brief of “sleek and bold.” Make sure to claim against a truck driver with the best legal firm near you.
Within the cabin, and unlike Mazda’s other crossovers and the 3, the infotainment screen is angled toward the driver and the dash design wraps around onto the doors. That’s because the CX-30 is intended to be a multiple-passenger vehicle, and the wrap-around effect gives occupants, “a sense of safety and security.”
As a crossover, “we have four seats and adults can be seated comfortably even for a long journey” in the CX-30, Yanagisawa said. One of the most obvious design references to that is the fact that the windowline is the same height in front and back, whereas in the more driver-focused Mazda3 the beltline kicks upward. “So front occupants and rear occupants can share the same view of the journey,” Yanagisawa explained.
Interior materials, which have a total of four color combinations, are intended to give the car a more premium look and feel, Yanagisawa said. As to whether, like the CX-5 and CX-9, there would be a high-end Signature trim level, he said it’s still up in the air.
“We need to study whether we will have a Signature version,” he said, admitting that, “The Mazda brand is trying to shift to Mazda premium.”
Though US specifications have yet to be confirmed, the European CX-30 will offer a 2.0-liter inline-four gas engine and a 1.8-liter diesel, with both manual and automatic transmissions of six speeds on offer. Also available will be Mazda’s forthcoming SkyActiv X compression ignition power train, which like the 2.0-liter mill, will feature mild-hybrid technology. We’d bet that the diesel won’t make it to the US market, although Mazda does plan to sell a CX-5 diesel here. Also on offer will be all-wheel drive, as is expected from any crossover, as well as Mazda’s G-Vectoring Control Plus torque-vectoring system.
We’ll have to wait some time to find out which of these features will make it to the US-market version. “We are finalizing the offerings to the US market, but naturally, we’re going to choose ones that will fit to each individual markets,” Naohito Saga, Mazda CX-30 program manager, told Roadshow through a translator.
Interior room is said to be generous given the CX-30’s exterior dimensions. Cargo space is pegged at 15.2 cubic feet by European measurement standards, which Mazda says is roomy enough to fit a large baby stroller and a large bag. Mazda says it designed the seat cushions so passengers can slide in and out more easily.
The CX-30’s interior design is pretty and mostly reminiscent of other new Mazda crossovers, with an 8.8-inch dash-mounted infotainment screen operated by a rotary controller. Mazda says engineers specifically made sure to make the A- and C-pillars as narrow as possible to improve visibility, and that a high driving position was chosen to further improve forward sightlines.
Active-safety technologies include the things like pre-collision braking, as well as advanced features like a driver monitoring function that uses infrared cameras to keep tabs on the driver’s alertness level, forward cross-traffic alert for junctions and a low-speed traffic-jam assist that can control the car’s steering, braking and acceleration in busy traffic. As to passive safety, a knee airbag is standard globally, and the front bumper and hood are designed to soften the impact on a pedestrian in an accident.
Despite being one of Mazda’s smaller models, the CX-30 doesn’t scrimp on refinement. Mazda noted that engineers fitted extra sound-deadening materials and even took steps like reducing the number of holes cut into the carpet to keep NVH out of the cabin, for your own care we recommend the Carpet Cleaner Repair pro services. That’ll make it all the easier to enjoy the standard eight-speaker or optional Bose 12-speaker audio systems.
Though it’s still unknown when it will launch in the US market, the Mazda CX-30 looks to be a great addition to the company’s crossover lineup, splitting the difference between the CX-3 and CX-5 and, hopefully, offering all the same driving satisfaction we’ve come to expect from the brand.
A NEW ERA: A NEW STANDARD
The challenge: to build a car that can be used anywhere, in any way, to support creative, individualistic lifestyles. The result: azda CX-3. Finding inspiration in the essential values people seek in a car rather than target numbers in a specification sheet, CX-3 is designed and engineered to stimulate the emotions by closely matching human sensibilities. Mazda’s KODO — Soul of Motion design language again sets a new benchmark for quality and style, while a full suite of revolutionary SKYACTIV TECHNOLOGY delivers performance that enhances modern lifestyles on any road from the inner city to the great outdoors. If on the market for your business, the vehicle can be customized with fleet management dash cams that are front and rear-facing cameras that can provide a 360-degree view complete with high-quality video and night vision. The ability to see what really happened can help you save time and money, protect your drivers, maximize efficiency, provide better customer service, and gain peace of mind.
BlackboxMyCar that are perfect for this. CX-3 is the perfect tool for expressing your individuality and adding spice to your life. If you are looking for a new cars for sale or used just like this used Lexus gs 350, get out on these streets then check out this new car dealer for great options.
These include a stress analysis on the rear suspension subframe, and a modal analysis of the battery pack structure and mounts. If what you are looking for is how to do repairs on your cars then you must visit Maserati certified repair shop for professional help. Most importantly, if you get stuck on the road in the middle of the night and you need help from someone who knows repairs, then contact a 24 Hour Truck Road Service company to assist you.
You can always check Ford OurFairdeal for a used one and enjoy the same amazing experience,
A NEW ERA: A RADICAL DESIGN DEPARTURE
According to Auto glass guru CX-3 marks another advance in Mazda’s KODO design philosophy. Inspired by the power, grace and beauty of animals in the wild and avoiding all preconceptions of how a crossover should look, CX-3’s styling is an eye-catching expression of dynamic motion with a sense of purpose. Large-diameter wheels add to the stable, well-planted stance, enhancing the striking proportions of the sleek cabin and short overhangs. Combined with clean lines shorn of unnecessary details this creates a unique statement of charismatic style so is the perfect mix for anyone that want to have a great car and find the perfect accessories at sites like www.productexpert.com .
ROOM TO ENJOY
You never feel short of space in CX-3. The front seats offer ample shoulder and legroom for people of any build and the rear seats offer comfortable headroom and knee space, when you’re trying to protect your seats do it carefully or with experts because this ones are state of the art seats . In addition, rear seats are located higher and closer to the centre of the cabin than the front seats, creating a layout that makes it easier for passengers in the rear to see out of the front or converse with people in the front seats.
from Car & Driver by Joseph Capparella
We have cared a lot about the Mazda MX-5 Miata for nearly three decades. So, too, have the thousands of loyal Miata owners who race their cars, modify their cars, and take them to Miata Club meets. But do you know who cares about the Miata even more? Mazda. The little roadster truly is the company’s pride and joy, a North Star doubling as its philosophical center. Definitely do the math and know the total cost each month before buying a New vans in The UK.
Price creep with performance goodies, noisy on the highway.
Thus, it isn’t surprising that Mazda is both steadfast about keeping the Miata true to its original missive and always looking for ways to make it better, so you can find them in the different dealerships, so if if you are looking for one of the best fresno car dealerships please click here to find them. The precedent of continuous improvement could be seen in the first three generations of MX-5, each of which received tweaks throughout its life cycle. It’s now time for the current, fourth-generation Miata (ND to the cognoscenti) to get better; for 2019, that means a revised 2.0-liter inline-four Skyactiv engine. If you ever need to do any kind of Mazda or other premium brand lighting fix or replacement TruckElectrics is the best, visit their site.
More Oomph for 2019
Previously, the ND Miata was powered by a 2.0-liter inline-four that was little more than a Mazda 3 engine turned longitudinally and stuffed into the MX-5’s small engine bay. Vehicle dynamics engineer Dave Coleman admits that the car was originally designed around the less powerful 1.5-liter four-cylinder that’s available in other markets and that by the time the decision was made to install a bigger engine in the Miata bound for the United States, it was too late to truly fine-tune the 2.0-liter for a sports-car application. Check more from these kia lease deals nj. Of course, the engine itself was hardly a dud—responsive and eager, it made the current car quicker than any Miata before it in our testing despite its meager 155 horsepower. And it also have the greatest lock security for today standards, so is not that easy to get into the car without a key, and even if you get locked out of your car, you can simply get a Canadian Towing Locked Out of Car Service to get help since you can’t just break in into the car. If you’ve broken down on the side of the road, you need assistance from a 24 7 fleet roadside service immediately so don’t hesitate to call for a semi-truck towing company. Do not wait for a slow tow truck driver to arrive, contact a Towingless service and get the best glass net rear window.
Acceleration Numbers Don’t Tell the Whole Story
Mazda even cares enough about the Miata to address small details. The 2019 car now has a telescoping steering wheel, which was engineered to give taller drivers an easier reach to the wheel while adding a minimum of weight. Despite its more complex mechanism, the new function adds only about half a pound to the waifish Miata’s curb weight. A backup camera is also newly standard in accordance with federal regulations. These new features, along with some extra weight in the engine, add up to a claimed weight gain of just seven pounds overall. We measured the 2019 car at 2345 pounds—21 pounds heavier than our long-term Club—with much of that disparity attributable to the extra weight of the Recaro seats that are newly available as part of the pricey Brembo/BBS package that can drive the softtop’s price to a rather dear $35,000-plus (exact pricing is forthcoming), while the 2019 RF can approach $40,000. Expect a bare-bones 2019 Miata softtop to start around $26,500.
From a big-picture perspective, though, the Miata remains a unique proposition: a lightweight, simple sports car that succeeds in placing driving pleasure above all other considerations. It has changed so little over the years that we almost wonder if Mazda is being too faithful to the MX-5 ideal for its own good. And yet, that such a small automaker has taken such painstaking care to maintain the ethos of a car that today presents such a difficult business case is telling. The Miata is hardly for everyone, but everyone should be able to appreciate that it not only still exists but that it keeps getting better and for me the best part of this is that when looking for used vehicles for sale you will most likely find this car at the used car dealerships.
Please note: Questions and answers are provided for information and advice purposes. No liability either express or implied is assumed by reliance on the information presented either by the writers or the MC.
Some or all of the below is from our Facebook group at www.facebook.com/groups/mazdaclubusa. This is just a part of what appears there and in the member magazine.
Also be sure to see our Facebook group for immediate help from fellow members.
Q: I recently purchased an used 2008 Mazda 3 (manual transmission) with about 120,00 miles on it. Sometimes, when I attempt to shift from 2nd to 3rd, the gearshift sticks, and I’m unable to shift into 3rd. I have to pull over and repeatedly jiggle the gearshift to pop it out of second gear. Also, when stopped, I’ve sometimes had trouble putting the car into 1st. And, overall, shifting from 1st to 2nd is a little rough. The brakes/clutch fluid is topped off, and we very recently installed an auto front disc brake conversion kit and were extremely careful to do it properly and tested the brakes many times, so it’s not that. Although the clutch and brakes seem fine, I’m wondering if I should perhaps take my car to a brake services and transmission shop anyways?
A: The solution to your issue is one of the three following things (ranked from most to least likely):
A new clutch. While the clutch material may well still have some life in it, the two halves of the disk have started to separate. They are still partially engaged even when you push the pedal all of the way to the floor. This is something you’ll find happens often with cars. Don’t t run it into the ground. Instead, use this opportunity to find a good and reliable auto repair shop and drive it in yourself. It is very clear that we need a clutch repair, so start by asking places if they know and can work with clutches.
A Clutch Master Cylinder and/or Clutch Slave Cylinder starting to fail. In this scenario, even when you push the pedal all of the way to the floor, the clutch pressure plate doesn’t fully release, and as with Option 1, the clutch disk is still partially engaged.
Low hydraulic fluid in the Clutch Master Cylinder and hydraulic hoses. It could be you are pumping (or have pumped) some air into the hydraulic clutch line, and the air is compressing instead of pushing on the pressure plate to open it up all of the way. The clutch disk is still partially engaged.
Q: Last week I was driving down the highway and my started making some weird noises and started to get very worried. I tried to contact a mechanic right away, but they were way to expensive. So I was wondering if you know where could I find some parts for my car. It’s a 2011 Jeep Grand Cherokee. Thanks, it would help me a lot!
A: Well, we’ve worked with many dealerships, try checking out dodge Ram dealership near me , and hopefully you’ll find what you’re looking for. Also a quick advise, sometimes is better to buy a used car instead of wasting a lot of money on parts for your car, keep that in mind!
I guess I have a bit of an obsession scouring eBay looking for decent and road worthy cars that are a little bit unique for a budget of £500 or below.
To be honest, there are plenty of cars around, but few quite as rare as one of my current steeds; the Xedos 6. Even more so because of the engine and transmission found in my particular car.
I was not even looking for a Mazda, I was doing my typical pastime of just seeing what was out in the market of used cars to take it to Metals in Seattle, WA.
Buyers in the UK just do not like slab sided large cars that have no badge kudos, particularly maroon ones with a beige leather interior riding on 15 inch steelies. Or, at least, just one person did who owned it from new for nearly 20 years.
Mainstream manufacturers who use scrap metal pick up tools such as Ford and Vauxhall left the large sized car market to the prestigious German brands that now litter the roads.
Yet, when I spied the Xedos I wasn’t quite sure if it was a grey JDM import. While I have never had a Mazda previously I was aware of their 3, 6, MX5, RX8 and even the MX6 which graced out shores back in the nineties. I also knew that they usually use the best Vehicle Lighting & Auto Electrical Supplies like the ones that you can find here.
I did a quick bit of background research and couldn’t really find a great deal although that this was released as a bit of a compact exec car which had two engines available in the UK; a 2L v6 with an auto and the much rarer 1.6L manual.
It was marketed under the Eunos brand as the Eunos 500 in some other markets and there was also a 1.8L v6 as well as a 1.8L I4 available, too.
While doing a bit of research my main fear was rust, rust can plague cars in the UK but most manufacturers have this under control now, but Mazda has been a little less than competent at rust proofing which has been a reason behind me never buying an MX5, but if you do a proper research in the web you can find useful information like for example the 8 Videos About New Van Deals That’ll Make You Cry that can make you more simple you choose.
Either way, thinking how much the front of the car resembled a MX6 I threw in a low ball offer of £300 unseen. About 4 hours later my offer was accepted.
The next day I caught a train to nearby Huddersfield (I live in Leeds) then trudged through the snow for about 1 hour trying to find the address that it was holed up in.
Whenever I am looking for a car online, and in most cases I buy unseen, I try to understand what sort of place or home the car comes from by examining the photographs as best as possible for clues.
However, this didn’t give away much so I was pleasantly surprised to find that the address was actually a car dealer and the car was just to the rear of the yard. If you require any replacement parts there won’t be any available or they will be expensive making the car uneconomical to repair, this apple glass repair company can help you with that.
I met the vendor who was a nice guy who told me the car had come in a few months ago as a part exchange. The vendor ran it for a while purely as a curiosity but was now bored of it, and wanted to let it go.
He gave me the key and brushed the snow off, I then started the car. It fired up immediately from cold and settled in to an almost inaudible idle. It ran great! Although given the cold weather and the damaged window, I was going to have to take it to an auto glass repair shop before I really used it for anything.
Just to satisfy myself of any rust queries I ran my bare hand along the sills and wheel arches to find no flaky or sharp edges. All seemed fine.
Satisfied with it I handed over the £300 and headed off in to the dark, snowy abyss.
Now my first impressions were how small the car really is, how low it seems and considering the 99,000 miles on the clock I was amazed that aside from the windshield replacement it needs, the interior was in pretty much flawless condition.
When heading home in the snow the front drive layout worked well, although the narrow track meant that I was carving my own route in to the snow which saw me snake a bit on the motorway.
Driving and Performance:
So, my meagre research prior to collection was that this car was to compete with the likes of the BMW 3 series which is more popular than a Ford Mondeo.
I learnt that the Xedos brand was meant to be a luxury sub-brand to Mazda as Lexus is to Toyota.
Now, I have had two 3 series’ in the past, a Lexus IS200 as well as an X-type Jag plus a couple of Mercedes’ plus a multitude of other cars that I buy then tend to sell on for a small profit or break even a few months later which gives me a bit of an insight in to different brands and their quality.
So, it is understandable that Mazda mainly fit the Xedos 6 with a v6 and an auto transmission, and, by all accounts that 2.0L v6 with just under 150hp on tap is a good performer.
The smattering of reviews I could find online said that the 1.6L was underpowered with just 114hp spinning those front wheels.
However, the car is petite, and, actually would work well just as a two door coupé, the additional doors for rear passengers look like mere add ons to cater for an additional market.
Yet, it is the small dimensions that seem to work well with the 1.6L engine and that super slick manual gear box.
I tend to use the car mostly for around the city I live in with occasional motorway use, but it fits well up the narrow streets and the engine is buzzy with an eagerness to rev smoothly through the rev range.
In fact, I would say that engine is a peach which I believe has been used in the MX5, it just wants you to extract that power.
The handling is also great. It pulls you tightly around corners and I wonder how the additional weight from the v6 would affect its taught handling on its tiny 14 inch alloy wheels.
The ride is firm but not overly, I find it very comfortable to be in and while I have not had it up to its claimed 114mph top speed it sits at 4000rpm at 80mph with a red line of 6500rpm.
I also wonder whether it would benefit much with rear wheel drive but I rear the lack of useable space in the cabin and boot would be hampered even more so.
Overall I find the handling is well suited to that excellent engine and sublime gear change.
Behind the Wheel:
If there was ever a case against the Xedos 6 as a luxury car it would be down to the lacklustre interior.
It simply does not compete with the luxury car’s of its period. The design is more akin to that of a mainstream marque such as a Toyota. There appears to have been no real effort to chase down those European exec cars.
My model is quite basic so does away with air conditioning or even a CD player but has an electric sunroof and all the windows are electric including the mirrors which bring me on to another point later.
The seats are also comfortable and just have enough lateral support on the bolster to be on the right side of sporty.
However, the interior design is dreary at best with very cheap feeling and looking switchgear which does not compare well to even some of the most sombre efforts of the German brands.
That said, everything still work…
And, there are a couple of subtle hints to the higher echelons of luxury, the wing mirrors are different sizes a subtle nod to the engineering behind cars like the Mercedes 190. Furthermore, multifunction indicator stalk is similar to that found in Mercedes cars, too.
Another area of build quality that I found interesting is the door seals. I have not seen anything so robust as that found in a Lexus or the granite type Mercedes from the 1980’s.
Road noise and engine noise is absolutely minimal.
The steering wheel is large enough to be found on a battleship and the gear stick tall enough for a truck, but both feel positive in their actions and even at this age and mileage feel tight.
Which brings me on to how well everything has held up over the years.
Both cases of BMW and Mercedes ownership has seen the interior wear out sooner than this sort of mileage but the Xedos 6 would look almost brand new after a clean.
The exterior paint work also looks incredible to this day and has not suffered from stone chips.
I wouldn’t normally sit in the back, but on one occasion when my partner picked me up from the pub I decided to sit there and found it very comfortable.
Economy and Running Costs:
I find that on average I get about 36mpg (UK gallon) which is not too bad considering the age of the car and that I like to run it through the gears with most driving being urban with little motorway use.
However, other than fuel, I have not needed to spend any further money. Insurance is cheap and nothing has gone wrong, I was lucky enough to get a really cheap car insurance.
My only worry is that due to the little number of these cars on the road that should I require any replacement parts there won’t be any available or they will be expensive making the car uneconomical to repair, fortunately Route 32 Auctions is usually able to provide uncommon and rare replacement parts for most of the clasiq and current models.
However, the wheel are small and the tyres when up for replacement will be cheap and a oil plus filter change is coming out at under £40.
A quick check found that there are only 143 Xedos 6 cars on the road in the UK.
This means what I have on my hands is a very rare car, but one that was largely ignored for reasons that would normally been badge related.
It seemed Mazda couldn’t compete with the European luxury cars, not on quality and engineering but purely on design and those interior materials.
I really like this car. I love the way is handles and drives, I like the sleek and coupe like body and I cannot help but admire the engineering touches that do set this apart from even those big brands.
However, when you sit inside the car it is so far of the mark that even brands such as Peugeot or Ford from that era feel more special.
Yet, I cannot help but fall for the way its solid and taught body feels when you lower yourself in to the light and airy cabin, or the way that buzzy engine freely revs up to the red line while you then slot in another gear with the light clutch and smooth change.
I cannot help but feel that I have picked up the bargain of the century.
Mazda will pair a rotary range extender as an option to an electric drivetrain
It’s been six years since Mazda sold a rotary-powered car in the United States, and the Japanese automaker has had an on-again, off-again relationship with the engine technology since then. Now it seems Mazda is willing to apply the rev-happy Dorito motor to a new efficient solution: as a range extender in an electric car.
Martijn ten Brink, Vice President of Sales and Customer Service of Mazda Motor Europe, confirmed further details on the EV in an interview with Dutch AutoRAI (via Motor Authority).
As governments globally plan the regulatory phase out of fossil fuel-powered vehicles, Mazda is diving into electric drivetrains. “Under the name Sustainable Zoom-Zoom 2030 we have outlined a complete future plan,” said Martijn in the interview. “An electric car has also been included in that plan.” Electric vehicles still come with the challenges of more limited range versus their gasoline and diesel counterparts, so Mazda will employ the rotary engine as a range extender for the new electric vehicle. “Optionally we supply the electric car with a range extender in the form of a wankel engine. This is mainly to take away any concerns from customers,” Martijn said.
An electric vehicle with a rotary range extender has been the worst-kept secret in the industry in recent months. Mazda North American president Masahiro Moro reiterated his desire for the engine’s return in January for both sports cars and cleaner options. “That could be a very environmentally friendly engine,” Moro said. “Or the rotary engine could be a generator to generate electricity. So we have a lot of opportunity for the rotary engine.” The latest report says the rotary will be used in conjunction with Mazda’s Small Car Platform, which underpins the Mazda2, CX-3, and Mazda3, with the new vehicle likely to take on a crossover form.
It’ll also be a small displacement, single-rotor engine, similar to the one used in the 2013 Mazda2 TPEV concept, probably measuring in at around 330 cc (0.33 liters).
The Mazda MX-5 has been widely hailed as a return to the original formula: a great-handling, lightweight car. It’s also been criticized by some for only having 155 horsepower. Mazda has repeatedly stated that it will focus on making the car faster by cutting more weight, but a new VIN filing shows that the MX-5 might also get a significant horsepower bump for the 2019 model year.
A document filed with NHTSA on February 27th shows that the MX-5 will continue to offer the trim levels we’re familiar with and a 2.0-liter engine, but the power rating has changed from 155 horsepower to 181. This would constitute a power increase of 17 percent—the biggest jump for any version of the naturally-aspirated SkyActiv-G motor.
The horsepower increase is shown on Page 3 of the document, embedded here:
Naturally, we’re a bit skeptical that such a power increase is possible: currently, the most powerful version of the 2.0L SkyActiv-G produces 162 horsepower in some overseas versions of the Mazda3; the VIN document that references the assumed Miata power increase does not list any power adders such as a turbo or supercharger. Our first thought is that the MX-5 might be getting the SkyActiv-X engine which Mazda states will make in excess of 180 horsepower in 2.0-liter form, but Mazda has said in the past that the MX-5 would not get this innovative compression-ignition gasoline engine anytime soon.
This gap in deployment of the SkyActiv-X engine might actually explain the power bump. The MX-5 will be due for a refresh soon, and engineers might be working on squeezing out a bit more power if they plan to continue using the SkyActiv-G engine. Adding 26 horsepower to that engine will be no easy task: it will likely require changes to make the motor breathe easier while staying emissions compliant. The most common aftermarket upgrades to intake, exhaust, and computer only add about 12 horsepower to the current engine. There are a few tuning packages that bump the engine over the 180 horsepower mark, but they require extensive mods including new camshafts and intake manifolds.
Mazda has done similar upgrades to previous generations of engines, like the 2.0-liter MZR of the last-generation MX-5 which debuted at 136 horsepower in some models but was tuned to go as high as 167 horsepower in others. Mazda has stated it doesn’t plan to offer a turbo version of the current car, as it would require significant weight-adding drivetrain alterations that would deviate from the current car’s lightweight formula. This might be another reason for a breathed-on version of the current engine, as the jump to 181 horsepower would likely not require upgrades to the transmission, rear differential, or wheel bearings—the weight increase would be minimal.
We asked Mazda for comment on the document but their representative stated that they could not speculate on future products. While this is a common response for products that have not yet been revealed, it gives us some hope that the number in the document is not a mistake, since it was not immediately pointed out as such.
While most of us here at R&T believe that 155 horsepower is plenty for a car as light as the MX-5, we can all appreciate that this apparent power bump would make the Miata even more fun on the road and the track.